Common causes and solutions for a gas stove that won't ignite are as follows. 80% of these problems can be fixed by yourself without contacting customer service.
Check if the gas supply is normal. Confirm that the gas valves are open: including the main valve and the valve before the stove, ensuring the handle is parallel to the pipe.
Check if the gas meter has power and a balance: If the display is not lit or shows "valve closed," the battery needs to be replaced or recharged.
If using a liquefied petroleum gas (LPG) cylinder, check if there is no gas or if the pressure regulator is faulty.
Replace the battery (most common cause). Most gas stoves use size D batteries, located at the bottom of the stove.
Open the cabinet or lift the stove to locate the battery compartment and replace the battery.
Note: Some batteries have a plastic protective cap on the positive terminal; remove it before installation.
Clean the ignition needle and burner cap. Observe if there is a "clicking" sound and an electric spark when igniting:
No spark: Check if the battery or ignition needle is broken or the wiring is damaged.
Sparks but no ignition: The ignition needle may be dirty or bent. Wipe it with a dry cloth or gently straighten it.
A clogged burner cap can also prevent ignition. Remove the burner cap and use a toothpick to clear the gas vent.
Check the knob and microswitch: If the knob is not pressed down fully, gas may not be released. Clean any oil or foreign objects from under the knob.
If all of the above are normal and ignition still fails, the microswitch may be faulty. It is recommended to contact a professional for repair.
