Stovetop Exhaust Hood

Send Inquiry
Stovetop Exhaust Hood
Details
90cm Dual-Cavity Asian Style Range Hood 838A(T6III)
1600Pa Super Air Pressure
2650m³/h Big Suction Power
Gray Coated SPCC Hood Body and Chimney
Category
High Cfm Range Hood
Share to
Description

Products Description

 

The Stovetop Exhaust Hood features a dual-cavity Asian style design with a width of 90cm. The hood body is made from SPCC material and coated in gray. Its suction power is as big as 2650m³/h, exhausting the cooking fumes instantly when it rises. It also features high-temp. self-cleaning function which makes cleaning and maintenance save both time and effort.

 

Stovetop Exhaust Hood Kitchen Look

 

1600Pa High-Static-Pressure Powerful Exhaust: Beat Flue Resistance and Prevent Smoke Backflow

Powerful variable-frequency drive swiftly captures cooking fumes. Even during peak cooking hours, it easily overcomes resistance from shared public flues and ensures smooth smoke evacuation without back-draft.

 

Super Air Pressure Stovetop Exhaust Hood

 

Intelligent Flue-Duct Recognition with Self-Adaptive Air Pressure

Equipped with an intelligent pressure-boosting system, it monitors real-time pressure inside public flues and triggers instant motor adjustment. The hood always delivers exhaust pressure higher than duct resistance, automatically ramping up or lowering power based on actual flue-duct conditions.

 

2650m³/h Instant Strong Suction Power for Efficient Smoke Removal

With a massive airflow rate of 2650m³/h, it quickly draws out rising cooking fumes, keeps your kitchen fresh and lets you enjoy a pleasant cooking experience.

 

Big Suction Power Stovetop Exhaust Hood

 

Three Core Components Build High-Performance Power System

 

The three key parts work in synergy to eliminate dense smoke step-by-step and refresh kitchen air rapidly.

Full-DC Variable-Frequency Motor: The SP3.0 full-DC variable-frequency motor provides consistent power for powerful smoke extraction and exhaust.

264-mm Large-Diameter Impeller: Adopting a 7:3 proportional-split structure that complies with aerodynamic principles, it guides airflow, diverts fumes and discharges exhaust seamlessly.

Integrated Boost-Air-Duct with a 66.6° Golden Centrifugal Angle: The volute-shaped casing boosts internal pressure and optimizes airflow directions. The exclusive 66.6-degree centrifugal angle creates an ideal passageway for cooking-fume discharge.

 

Omni-Directional Smoke-Containment for Precise Capture with Zero Smoke Escape

The newly-designed dual-chamber structure aligns each air-inlet vertically with one burner for targeted smoke extraction. It effectively blocks smoke leakage even when both cooktop burners work simultaneously.

 

Precise Smoke Capture of Stovetop Exhaust Hood

 

Down-draft Negative-Pressure Smoke-Capturing for Enhanced Near-Range Suction Performance

Boasting an innovative near-suction profile with an 8-cm downward-extended rear-body design, the dual-chamber negative-pressure zone gets much closer to the fume source. It traps smoke faster with zero escaping fumes.

 

High-Temperature Self-Cleaning Function, Automatic Degreasing for Hands-Free Maintenance

Once the total runtime hits 60 hours, the range-hood automatically starts the heat-cleaning cycle. At 75℃ high temperature, grease melts and flows down into the oil-cup to maintain sustained strong suction. Manual one-touch cleaning is also available to save you from troublesome hood-washing work.

 

High-Temp Self-Cleaning Smart Range Hood

 

Smart Hood-Cooktop Linkage for Effort-Free Cooking

When your gas stove ignites, the range-hood turns on automatically. After you shut down the cooktop, it keeps running for another 3 minutes to clear residual smoke before powering-off. Intelligent operation simplifies your cooking routine.

  

                                                                         

              

Specifications

 

Product Name Stovetop Exhaust Hood Model No. 838A(T6III)
Body Material Gray Coated SPCC + Tempered Glass Levels of Speed 3 Speeds
Maximum Airflow 2650m³/h Motor Power 268W
Noise Level 70dB Motor Type Full-Sealed Metal DC Motor
Fan Type Metal Fan with Teflon Finish Control Type Sensor Touch with Gesture Control
Filter Gray Coated SPCC Mesh Filter Light Type ≤2*2W LED
Venting Size 190mm Air Pressure 1600Pa
Rated Voltage/Frequency 220V~,50Hz Rated Input Power 272W
Product Size 895*492*680(W*D*H)(mm) Packing Size 957*760*582(W*D*H)(mm)
Loading Qty (20GP/40GP/40HQ)=72/144/144 G.W/N.W 33.9kg/26.5kg

 

Product Dimension Drawing(if any)

 

                                 

Product Diagram of Stovetop Exhaust Hood

 

 

Installation View

 

Installation View of Stovetop Exhaust Hood

FAQ

 

Q1: What makes this stovetop exhaust hood effective against back-draft from shared public flues?

Our stovetop exhaust hood comes with a 1600Pa variable-frequency pressure system. It intelligently detects flue-duct pressure and adjusts motor power automatically. Even during peak cooking time, this stovetop exhaust hood overcomes heavy flue resistance and stops cooking-fume backflow perfectly.

 

Q2:Does this stovetop exhaust hood support self-cleaning and smart stovetop-hood linkage functions?

 

Yes, this stovetop exhaust hood is built-in with practical smart features. It runs a 75℃ high-temperature thermal-melting self-cleaning cycle after 60 working hours. Besides, the stovetop exhaust hood turns on automatically when the cooktop ignites and clears residual smoke for 3 minutes after the stove shuts down for user-friendly operation.

 

Q3: How does the internal structure improve the suction performance of the stovetop exhaust hood?

This stovetop exhaust hood adopts a SP3.0 full-DC motor, a 264mm large-size impeller and a 66.6° integrated boost air-duct. Paired with a dual-chamber down-draft negative-pressure design, the stovetop exhaust hood delivers 2650m³/h airflow to capture fumes thoroughly without smoke escaping.

 

 

Hot Tags: stovetop exhaust hood, China stovetop exhaust hood manufacturers, suppliers, factory

Send Inquiry